Why SpaceX Built A Stainless Steel Starship

Why SpaceX Built A Stainless Steel Starship

This episode of Real Engineering is brought
to you by Brilliant, a problem solving website that teaches you think like an engineer. If you have been on the internet in the past
month, you have probably seen a picture of Elon Musk’s latest project. A rocket that looks like the brainchild of
a H. G Well’s fever dream of the future. It doesn’t look like any current generation
rocket by any shape or measure. It’s shorter and fatter than your typical
Space X rocket, and most strange of all, it’s made of stainless steel. A material that has largely fallen out of
use for propellant tanks since the 60s. Steel is strong, but it’s pretty heavy. Making it unsuitable for flight structures. Reducing the weight of the launch vehicle
is an art form in rocket science. Every kilogram matters, and engineers have
come up with some innovative ways to reduce weight. WD-40, was originally developed to displace
water, which is where its name comes from, to protect the metal tanks of the Atlas rockets
from rusting, because they weren’t painted to save weight. [4] And those Atlas rockets were made of stainless
steel. In those days aluminium alloying material
science hadn’t quite developed far enough, and the engineers of the Atlas rockets instead
opted to use extremely thin stainless steel for their propellant tanks, varying from 2.5
millimetres to about 10 millimetres. These were essentially metal balloons. As they were structurally unstable when unpressurised. In one infamous case on May 11th 1963, an
Atlas Agena D lost pressurisation on the launch pad, allowing the weight of the upper stage
to buckle the thin steel. Pressurisation adds strength to pressure vessels
as the pressure provides a restoring force for small deformations, so if the metal attempts
to bend inwards the internal pressure pushes it back out. This strengthens all rocket tanks allowing
their thickness to be minimised, but this application took it to the extreme to make
up for steels density. Our choice of material for aviation and aerospace
applications has evolved with our mastery of material science. Specifically with the materials available
to us that have the highest strength to weight ratios. We can visualise these strength to weight
ratios on graph like this. Plotting the strength of the material against
its density.[6] Looking at this it’s pretty clear that steel
adds a significant amount of weight, while not adding a proportional amount of strength. Steel is typically 2.5 times heavier than
aluminium, but it is not 2.5 times stronger. So why use stainless steel? Well, strength to weight ratios are not the
only factor engineers have to consider. Something you may not consider are things
like thermal conductivity. Aluminium has a much higher thermal conductivity
than steel, and thus can conduct heat from its surroundings into the cryogenic fuel much
faster. This can vaporise the fuel, which requires
boil-off valves to vent the vaporised fuel. To minimise this problem, rocket fuel tanks
are often sprayed with foam insulation, that’s what gave the external tank of the space shuttle
it’s distinctive orange colour, but this adds a substantial amount of mass itself,
which in turn decreases the weight saving benefits aluminium provides. [2] However, the Falcon-9 fuel tanks are not insulated. To prevent major boil off of the fuel, the
fuel is loaded as late as possible. This reduces the amount of fuel that will
be vaporised, but also makes the job of getting the Falcon 9 certified for human payloads
a bit of a nightmare. NASA did not want Space X to fuel the rocket
with passengers on board, because as we saw earlier things can go wrong during this phase. In August 2018, they finally approved the
Falcon 9 for this “load and go” style of fueling for human flight. [3] The aluminium-lithium alloys used in the Falcon-9
were not developed until the late 50s and early 60s, which increased their strength
to weight ratios, allowing the introduction to aerospace applications. [4] The stainless steel balloon tanks of the Atlas
rockets were eventually made with this aluminium alloy metal, and their strength to weight
ratio were boosted by using a unique stringer pattern called an isogrid, which boosted the
aluminiums ability to resist buckling, like that of the Atlas Agena D. NASA performed these huge compressive buckling
tests on the aluminium lithium tanks of the SLS rocket. Typically you use little strain gauges, whos
electrical resistance change as you stretch them forcing the electrons along a longer
path to keep track of the strain in the material, but for something this big they would have
needed thousands. Instead they painted dots all over the structure
to allow computer imaging software to keep track of the strain. That isogrid structure is excellent for maximising
strength while minimising the material needed. It is essentially an inter woven pattern of
I beams that increase the stiffness of the overall structure. You will see this pattern everywhere in aerospace. From these sixties era rockets to Space X’s
new dragon 2 capsule. Space X, to date, has used aluminium-lithium
alloys in their propellant tanks. But they opted not to use this isogrid structure,
even though it provides fantastic strength to weight performance, it is absurdly expensive
to manufacture. To manufacture isogrids you start off with
a thicker piece of aluminium and machine it down using a CNC machine. This results in about 95% of the material
going to waste. Instead Spacex opted for a thin skin of aluminium-lithium
alloy and then stir welded strengthening stringers in place. We are constantly balancing a huge number
of factors. Here the cost of manufacturing the rocket
influenced it’s design. Typically the cost of launching an extra kilogram
of material to space far outweighs the cost of material, but in cases like this the waste
in the manufacturing process can influence our material choice. For example Musk attributed the cost of carbon
fibre composites as one of the primary reasons he abandoned it as a material for the Starhopper. Carbon fibre composites cost about 135 dollars
per kilogram, and a significant amount of it is thrown away in the lay-up process. The manufacturing process for carbon fibre
composites is extraordinarily expensive and difficult. As explained in my carbon fibre video. Carbon fibre composites gain all of their
strength from the long and thin carbon fibres inside the plastic resin that holds them together. This means that their strength is not the
same in all directions, and in order to ensure the material can be strong in all directions
you have to layer your carbon fibre composite in a very specific way. You then have to cure it in a pressurised
oven. This was one of the major flaws I pointed
out in predicting the failure of the early prototypes of the BFR carbon composite tanks,
which were made in two parts presumably because they couldn’t find tooling and an autoclave
big enough to cure a full sized tank. Being perfectly honest this is the only subject
area where I have enough expertise to make comments on other peoples designs, and I was
surprised Space X were pursuing the material at all, for the reasons stated above, and
as it’s unsuitable for a vehicle that not only has to withstand the freezing temperatures
from the cryogenic fuel on assent, but the scorching temperatures of re-entry. Not once, but twice. As this will be the first vehicle in history
expected to visit Mars AND return. Here we really start to see where stainless
steel shines, and why Musk is opting for a stainless steel vehicle. Let’s plot another graph, this time plotting
strength against maximum operating temperature. Here we can see that stainless steel outperforms
both aluminium alloys and carbon fibre composites by a significant margin. [6] The Falcon 9 first stage rocket serves only
to boost the second stage to about 65 to 75 km in altitude and between 6,000 to 8,300
km/h, before flipping over and performing re-entry burns to slow down before entering
the thicker atmosphere at relatively slow speeds. Even then, the engine nozzles, which are designed
to tolerate massive temperatures take the brunt of the re-entry heating, allowing the
aluminium tanks to avoid any major reentry heat. This is not how the Starhopper is intended
to work, because it is being built as an interplanetary vehicle. The starhopper can expect to enter into the
Martian atmosphere at speeds of up to 21,000 km/h and experience temperatures up to 1,700
degrees. Well above the maximum service temperature
of both aluminium and stainless steel, but we have ways of leaching some of that heat
away before it can heat the metal. The curiosity rover utilised a phenolic impregnated
carbon ablator, which is extremely extremely light, has a low thermal conductivity, and
can resist extreme temperatures of up to 1,930 degrees. [5] But nothing this heavy has ever entered the
Martian atmosphere before, and it’s not going to be any easy task for it to slow it
down. It’s going to have to enter the martian
atmosphere at an extremely high angle of attack to allow the thin martian atmosphere to sap
away speed through drag for an extended period, but drag comes with heat. Stainless steel may be heavy, but it will
require significantly less heat shielding that an aluminium or carbon fibre composites. Once again closing that weight advantage gap
of these alternate materials . In fact Musk has stated that the rear side of the Starhopper
will require no heat shielding at all, and he plans to use a strange technique to cool
the wind facing side of the vehicle. Using the same method humans use to cool down,
by sweating. Musk plans to pump liquid methane between
two steel panels on the windward facing side of the Space X rocket, where it will gain
heat, vaporise and evaporate through small holes in the rockets surface. This is pretty weird way of cooling a ship,
and I wondered why you would not just opt to use the tried and true method of ablative
tiles. Then I remembered that this ship needs to
make a return journey, and the entry into the Martian atmosphere will damage the tiles
and require maintenance. There is no oil on mars to manufacture new
phenolic resin or the carbon needed for ablatives. So, using methane, the fuel the new Raptor
engines that Space X will use for the Starhopper, makes a lot sense. It reduces the equipment the rocket will need
to carry to Mars, making the rocket significantly lighter. They can just use the equipment they already
needed for refueling, making it double purpose. They just need to mine water and extract carbon
dioxide from the atmosphere, and then do some fancy chemistry to produce methane and oxygen. The prototype they are building at the moment
is likely just to test the manufacturing techniques needed to build it, and test it’s flight
capabilities. This ship does not need to be space worthy,
it just needs to have the same weight, centre of gravity and shape to allow space x to test
it. On the surface though the whole operation
looks like a bit of a shitshow, and I really try to be positive about engineering advancements,
but the thing literally fell over in the wind last week. I’m really curious on how this whole thing
is going to unfold. Sometimes you just need to make mistakes to
learn, which is why you should sign up to Brilliant. Brilliant recently introduced a new feature,
called “Daily Problems”, which will present with you with interesting scientific problems
to test your brain. Like this one that will teach you how solar
sails allow spacecraft to gain speed without rocket fuel. If you answer a question wrong like I did
here, it teaches you exactly why. Allowing you to learn from your mistakes. Brilliant even have an app that you can download
to play these brain teasers on your morning commute. Each Daily Problem provides you with the context
and framework that you need to tackle it, so that you learn the concepts by applying
them. If you like the problem and want to learn
more, there’s a course quiz that explores the same concept in greater detail. If you are confused and need more guidance,
there’s a community of thousands of learners discussing the problems and writing solutions. Daily problems are thought provoking challenges
that will lead you from curiosity to mastery one day at a time. So what are you waiting for? Go to brilliant.org/realengineering/ and finish
your day a little smarter. And the first 500 of you to do so will get
20% off the annual subscription to view all problems in the archives. As always thanks for watching and thank you
to all my patreon supporters. If you would like to see more from me the
links to my instagram, twitter, discord server and subreddit are below.

You May Also Like

About the Author: John Markowski


  1. The daily problems on Brilliant are actually fantastic. Great way to challenge your brain each day. Thanks again to Brilliant for making these videos possible: https://brilliant.org/realengineering/

  2. Whoehahaha Nasa cant get you to the moon but Elon Musk a CAR BUILDER building cars that also have flaws
    will get you to mars? Whoehahahaha. Now Disney land is more realistic than this bullcrap!!!!!
    There is not 1 independent agency that we had through the years that could get a single! person
    into orbit. OOO!!!…. wait he is Elon Musk shoot! this guy can achieve anything!!!!
    what Lying NASA and al other space agencies Included independent space companies couldn't do
    will be solved by Elon musk all by himself. Yeah right! Sleep well.

  3. Nice talking but al you are doing is talking about obsolete and old tech.
    If this is the best we can do right now better stay in bed watching mickey mouse.

  4. By using David Adair's magneticly contained, nuclear engine,one could use lead for the rocket body and it wouldn't much matter. His rocket motor has so much power it probably could push our sun to Andromida in shortorder..

  5. They built a stainless steel starship because it is cheaper than composite. The truth is starship isn't going anywhere as we live on a flat earth, so they are just building a stainless steel model and then will fake the rest with CGI like they did with Starman and the Tesla car in space! "I mean it looks so absurd, you can tell its real because it looks so fake!", Mr Musk

  6. Wtf is alli-mini-um….lmao I assume he means aluminum. Pronounced ah-lum-in-numb. I laugh everytime he says it because it sounds like the metal from x-men that wolverine has in his body. Hahahaha

  7. because is good to test and is resistant and does not oxide, but launching into space is not good for the crew, it does not defeat radiation

  8. "Sometimes you need to make mistakes in order to learn. Which is why you need to sign up to Brilliant."

    Signing up to Brilliant is a mistake?

  9. hope you seen things recently with the star hopper? and it's aluminum.. i know the brits wanted to change it from it's original conception.. oh well. it's not aluminium though. and it's not leeever. lol. sry.

  10. I think Elon Musk is a puppet and distraction to take people's attention away form the globalist's secret space program which is already on Mars. They build him up as a great American hero but he's a phony.

  11. Space X built a stainless steel Starship, for one reason only. This was Space X's tribute to John De Lorean and Back to the Future ! Pretty simple, nothing complicated.

  12. Amazing content and good material knowledge! Another interesting consideration is application of torsional loads unto the material as Kepler's laws take over. This certainly makes isotropic materials like SS a preferred choice, at least until we can improve composite material science to respond equally well to compound forces. However, there will always be limitations associated with substrate selection for various coatings/shielding, especially as their CTEs vary and internal strain is created.

    Looking forward to other videos!

  13. Wouldn't they be able to reprocess the aluminum and carbon shavings and recover the waste of materials and money? It may not be usable for fuel tanks or space frames but it can be repurposed in some way. Someone figured out how to take tons of saw dust and mix it with epoxy and make building materials with it after all.

  14. The number of stainless "rings" comprising the New Starship and Superheavy first stage seem to be a real construction nightmare. I would like to know why the stainless cannot be formed (rolled) into much wider rings to improve the continuity of the skin for fewer welds and faster build times.

  15. real engineering REAL BULL SHIT Specially made for the indoctrinated retards who live in the science fiction world presented to them on a spoon.

  16. That's mean all roxhet before this just go and never come back…that seem like arrow…want to kill sky soldier…mad yajuj majuj…

  17. Hello Space x and Tesla staff.I´m very happy to write you to give some apportations and support for the SpaceX Mars project 2022 & 2024.

    One of the questions has been done is what is going to do the starship on the surface on Mars after to get there .

    I think The firt experiment would be to work with a plants like the KIRI . ( 5 kiris can produce o2 for a person )

    Build a glass greenhouse for kiris or similar plants with a pump to add pressure like Earth's atmosphere (1 atm). This is because there is 1/100 less pressure on Mars than Earth and without atmospheric pressure, the plant will die because it cannot take the gas by itself. Therefore, a pump must be incorporated into the greenhouse to take CO2 from the atmosphere of Mars, add pressure and finally store the oxygen produced by the plants for the crew or the ship.Thank you .Visit Youtube channel : Oscar Barnley Barnola.

Leave a Reply

Your email address will not be published. Required fields are marked *